For a different effect, brush on three coats and apply a final fourth coat using a silk or sea wool sponge. However, applying four coats will produce a totally different look.

Generally, three- four coats of glaze are recommended. Use a soft fan or glaze brush, depending on the area and surface to be covered. Q: What are some basic tips for creating effects with Elements™?Ī: Apply to properly fired shelf cone 04 bisque. However, intermixing Elements with other glazes is unpredictable make test samples first to see if the fired result is the desired effect.

Q: Can Elements ™ be Mixed with Other Glazes?Ī: Using Elements with Pottery Cascades creates beautiful effects. Some Elements™ may produce pleasing effects when fired to cone 6 all will change color:

A heavily loaded kiln will affect the color and the float within the colors as will the firing at temperature cone 06 versus cone 05. A medium ramp/firing rate is recommended (250☏ per hour) at shelf cone 06.Īn uneven glaze application, the piece’s shape and surface texture can affect the fired finish.Īmount of detail on the ware can also affect the fired finishĪllow the pieces ample room in the kiln for air circulation during firing. When the wet look has gone from the first coat, you may apply the next coat of glaze. Make sure the glaze has dried thoroughly prior to firing. Try to get the brush fully saturated (loaded) and apply each coat in the same direction. When applying them over a large surface area we recommend a broad, soft brush, such as a CB-604 #4 Soft Fan Brush or CB-618 #8. Dipping your brush directly into the jar could contaminate the jar's contents, especially if you are using other glazes. Apply 3-4 coats to your piece. Elements™ glazes were designed to mature at a shelf cone 06 (999° C or 1830º F). Dispense glaze onto a palette (tile, plate, etc.) and apply with a soft brush or decorating accessory of choice (sponge, stamp, etc.). Information on alternative application methods is listed in the section 'Usage Variations and FAQ's'. Shake for 5-6 seconds before use. The following application recommendations are based upon the original product development intent and use for the product. We recommend testing to determine color, surface characteristics and movement prior to use. Many of the Elements™ produce interesting effects at cone 6 but will change color.Many of the Elements™ produce interesting effects at cone 6 but will change color. Allow ample room for air circulation in the kiln during the firing process as heat work and adequate oxygen can influence the glaze appearance.We recommend application in one direction. Uneven glaze application can affect the look of the glaze.We recommend testing prior to use. The ever popular FN-215 Aztec Jade, FN-217 Evergreen Fir, FN-218 Green Sapphire, and FN-219 Lustre Green are now part of the Elements product family as their performance characteristics are similar. Elements™ and Elements™ Chunkies can be fired at higher temperatures but will change in appearance.

As movement and flowing are characteristics of these glazes, taper off toward the bottom of the ware to prevent glazes running off the piece onto kiln shelves. Apply 2-3 coats to shelf cone 04 bisque, allowing to dry between coats. General UseĮlements™ and Element™ Chunkies are designed to mature at cone 06/05. Elements ™ and Element ™ Chunkies were designed to simulate the aesthetic, movement and interest of mid-range and high fire glazes in a cone 06/05 oxidation kiln firing. This high performance art glaze gives the artist a wide variety of options in one product as application, firing temperature and shape will influence the outcome. Inspired by aspects of nature, Elements™ and Elements™ Chunkies produce lush, organic, and earthy hues. Description EL 123 - Patina (4 ounce) Mayco Element Glaze Rich & Elegant

Patina green glaze